Crazy Fun with Dimension Lines in Ez-Architect

Ah, you might get confused when you start using dimension lines, especially if your lines have arrows on the ends. Here’s how it goes.

You draw a simple line:

Here’s a simple line without added dimension lines.

Now it gets a little interesting when you add a dimension line. You see the plain line on the lower left, then dimension line above and to the upper right. It’s relatively clear what’s what, especially if you know that you’ve set dimension lines to be “below/right” in your preferences. Here “right” takes precedence.

Add a dimension line to a plain line and it gets interesting.

Now what happens if you’re working with double-arrow lines. Here’s the double arrow:

The double arrow without a dimension line.

And now, the thrill comes when you add a dimension line to the double-arrow line.

Here’s a double-arrow line with its neighboring dimension line. Which is which?

If you know what you’re doing, you’ll know that the dimension line is the one with the measurement info in the middle. But this could get confusing in a detailed plan. You do have a few options you can play with when you need to have dimension lines:

Some Options for Dimension Lines

You can select whether to have auto dimension lines or not (Yes/No). You can select how far they sit from the object. You can also decide whether you want to group them with the object or not. And for rectangles, you can have them in- or outside.

If you don’t group them, you can separate them so there’s no confusion:

Because these are not treated as one object, I can easily add distance between the dimension line and the object line.

Of course, you can always ungroup a dimension line set should you need to.

And finally, there’s always the option of using the dimension line item instead of an auto-dimension line. This depends on what you need in your drawing:

The line itself has a label, so a dimension line isn’t needed.

Again, depending on what else you’ve got going in your plan, this can be very handy. You’ll find this line type at the bottom of the line palette. This is especially useful if you want to draw dimension lines that aren’t directly associated with one particular object. This line type always has some kind of end on it. So you’ll likely use it to set down measurements unrelated to individual objects.

Some examples of different line ends and thicknesses

These line ends you see above can, of course, also be used with nondimensional lines. Just select any line thickness and then double click the line palette to cycle through the different types of ends.

Lots of different ends are available

You’ve got two types of hollow arrows, two types of line arrows, slashes in two directions, ball ends and a lovely “X.” What more  could anyone ask for more!

Have some crazy fun with lines!

 

Advertisement

Tags: 2d, 2D home design, CAD, Design Software, drawing, easy home design, Ez-Architect, fast floor plans, floorplan, floorplans, home design, Home Design Software, home software, house, software, Windows Design Software, Windows home design