Posts Tagged ‘Mac Design Software’

The Truth about the System Requirements for MacDraft 6.0.6

January 26, 2013

I am planning to confuse you about this. So let’s see how smart you are.

The newest versions of MacDraft PE (6.0.6) and MacDraft Pro have some interesting system requirements. The INSTALLER requires Mac OSX 10.5. HOWEVER, the PROGRAM requires only Mac OSX 10.4.11.

OMG, so what does that really mean? It means that if you haven’t yet upgraded your MAC to OSX 10.5, you are not out of luck. (That OS 4 to 5 upgrade can, in many cases, require getting a whole new computer, which you may or may not want to do.) It means that you can run the newest 6.0.6 version of MacDraft, with a little TLC from us. It just takes a little tweaking and talking via email for us to make it work for you.

Here’s what to do if you’re champing at the bit to purchase 6.0.6 (and you are running Mac OSX 10.4.11) and want to try the demo (we recommend you do this first). Contact us via email (wisdomandinfoATtheliquidateherDOTcom) and tell us that you’re running 10.4.11 and that you need a special link to the MacDraft demo that will run on your computer.

We will dutifully respond with the links to Pro and PE demo versions 6.0.5 which have the installer which will work on 10.4.11.

Now I didn’t get my numbers wrong: we will send you links to the 6.0.5 demo which will be sooooo close to version 6.0.6 that you probably won’t be able to figure out the difference once you decide to purchase 6.0.6.

When you decide to purchase 6.0.6, follow the links here for the Mac Draft PRO CD version or for the MacDraft PRO downloaded version. Or for MacDraft PE CD version.  or the MacDraft PE downloaded version. Or go to our website to make your purchase.

You will receive the 6.0.6 version with your purchase and it will have the installer that requires OSX 10.5.  What to do? Contact us via email (wisdomandinfoATtheliquidateherDOTcom) and we will verify your purchase. Then we will email you a special download link for the full 6.0.6 version that does not have the installer and will work on 10.4.11. And you’re good to go.

I told you it would be confusing.

P.S. If you do have OSX 10.5, you can immediately download the current demos or make your purchase from our site. And you can ignore everything that you just read! (Sorry, that was awfully mean.)

Advertisements

Updated MacDraft Demo Download

December 9, 2012

Just in case you’re using version 10.8.x where the gatekeeper wasn’t letting the installer do the install thing, these demos have been fixed so you can install with joy and ease! So you are welcome to download again from here.

Have a look at our recent post for details of what’s in the new version.

 

New Version of MacDraft Released

December 5, 2012

Recently the newest version of MacDraft was released. The current version is 6.0.6.

As you likely know, version 6.0.5 added support for AutoCAD AC1024 (2010/2011/2012) DWG files, and improved functionality for reading DWG files. Renaming layers and renaming library objects is now easier with the Rename option in the drop down menus of the Layers and Library palettes.  Mac OSX Lion issues have been resolved and many other performance and stability changes have been made. Legacy issues from previous versions have also been addressed.

In addition, we now have a customized toolbar, a new layers palette, new library palette which now works with seamless integration with iPhoto. The new image menu gives you lots more control of your images, and much more.

You can download an update from here. On this page you’ll find free updates for each Microspot program in several combinations.  Be sure to update from the version you are using for the correct software. Each updater is different. Read the list carefully to locate your software, then read it carefully again to find the correct update.

 

How Unusual is your Ez-Architect Project?

September 22, 2012

Tell us how you are using Ez-Architect.

Are you a pro using it often for client projects?

Are you a do-it-yourselfer who plans and executes projects for your home or other location?

Do you do any unusual things with it, like design sets for theater productions, plays, videos etc.

We used it to design our set for The Perils of Cheryl. We came up with a brilliant scheme and it worked great. Watch the demo right here.

And tell us how you use Ez-Architect or MacDraft or MacInteriors, for that matter.

The more unusual, the more unusual……

Ez-Architect – A Bug has been found!!!

September 6, 2012

Okay, we admit it. We’re not perfect. But really, all these years and no one ran into this until last month! Really, has anyone been using this software?

Is your “printed” page blank?

Does your printout not fit the page properly?

Is it cut off where you don’t expect it to?

There are several reasons that these things may happen.

And here are several things to check:

First: Check your scale. For example if you selected 1/4″ = 1′. Given that a sheet of paper is 11″ long, the longest object you could place (at that scale) on the one sheet would be 44 feet, so if you have an object longer than 44 feet or if any part of your plan exceeds 44 feet, it cannot fit on a single sheet of paper.
If you select 2 sheets by 1 sheet of paper, the drawing (at the 1/4″= 1′ scale) will cross over two sheets. However, if you tell the program 1 sheet but draw something that is bigger than the one sheet, things don’t work so well, the program doesn’t really know how to handle it, so it prints just part of it.

Second: Check your paper size. As noted above, if your plan is bigger than the paper size you’ve selected, the printing won’t work properly. Items will be cut off or will try to print (oddly) to the only available page. And please note: there is an anomaly in Ez-Architect where this happens. Suppose you select legal paper and 2 x 2 page layout. If you save your plan and then open it again and then go to the paper size dialog, it will say “letter.”  Note this is only a dialog error not an error in the program. Because if you look at your plan and its layout, you’ll see that your plan is still has legal sized pages.

Third: Check your page layout. This refers to how many pages your plan will cover.

Fourth: Check your printer resolution.

The faint lines that occur on some of the printed objects relate to printer resolution and capability. I, too, can see your plan on my screen (which is set at 1440 x 900 resolution) and some objects print very weakly on one printer (b/w laser) in most of the “better” settings I’ve tried (it is an older printer). However my other printer (color inkjet) printed the plan very nicely, where the lines that hardly show on the laser printout are somewhat light on the inkjet, but they are clearly there, just delicate looking. So you might try another printer or different printer settings so you can see the objects without having to alter your plan.
The other option is to make all the lines in the objects that aren’t printing thicker.  Just select the object and change the line width. Experiment with printing to see what thickness prints adequately before you make them too thick, as on my screen some of the line thicknesses don’t look any different from each other on the screen.

And here’s the clincher, or is it the clinker?

Did you set your page orientation to Landscape? Yes, oh my, if you set your page size for Landscape, your plan will not print! oh my, and oh my again; so many thousands of you out there using this software for years and August 2012 was the first time anyone ran into this problem. Are we all so Portrait oriented that we never ever tried to print the wide way. My goodness, how normal we all must be.

Never fear, the developer has been notified along with a list of other minor glitchees and suggestions for the improving the program. So, if you’re reading and you’re a user who has wishes, now’s the time to get your wish on the wish list for the next update. We don’t know when, but we can say, eventually. But if you don’t speak, you won’t be heard. So let us know.

MacDraft Professional, MacDraft PE version 6.05 now available

May 31, 2012

Minor updates and bug fixes comprise this iteration of both versions of MacDraft.

If you haven’t tried it yet, you can download a demo of each and use it for 14 days:

MacDraft Professional 14-day Trial

MacDraft PR 14-day Trial

Try these out and let us know how much you love them!

You’ll find all the info you need starting here.

Home designing rules!

March 31, 2009
This website is dedicated to providing news and information on consumer level home design software, and it will address the topics of mac design software, windows design software, and tips and tutorials.

CAD software is computer aided design software. Things have come a long way since the 80s when AutoCAD was for the professionals and engineers, Design Your Own Home (Architecture, Interiors, Landscape) was for consumers, and MacDraft and PCDraft was for both. Most consumer level software has little true AutoCAD compatibility, nor does it need it, nor do the consumer level software buyers care. MacDraft Personal Edition and MacDraft Professional are a pair of Mac programs that illustrates this split, in that MacDraft Personal Edition is for the consumer and has no AutoCAD compatibility, while MacDraft Professional is fully AutoCAD compatible.

And then there’s our inexpensive Windows XP, Vista, Windows 7, Windows 8 home design CAD software, Ez-Architect.

 
Check out our “About” page, whose link is to the right, for a more in-depth look at what we are about.
Landscape Vision is an easy to use landscape design software application that produces amazingly professional results. Who needs fake looking drawn plant images or skimpy plant data bases? The landscape of your dreams is within your reach!
Landscape Vision is an easy to use landscape design software application that produces amazingly professional results. Who needs fake looking drawn plant images or skimpy plant data bases? The landscape of your dreams is within your reach!

%d bloggers like this: